dehydration dewatering screen deviation problem solutions
Leave a message
How to solve the problem of material deviation of dehydration dewatering screen?
Dehydration dewatering screen is a special type of the linear vibrating sieving machines with strong vibration forces design. mainly used for dehydration, desliming, and media removal. It can be used for sand washing in sand and gravel plants, slime recovery in coal preparation plants, and dry discharge of tailings in concentrators. In production, sometimes the dehydration vibrating screen will have the phenomenon of material deviation and not discharging, which will greatly affect the production. The reasons and solutions for not discharging during work are absolutely available.
dehydration dewatering screen Factory Pictures

dehydration dewatering screen Advantages
1. The exciting force on both sides of the screen machine is uneven, resulting in different amplitudes on both sides. This problem can be basically solved by adjusting the included angle of the eccentric weight of the two vibration motors to be consistent.
2. The design stiffness of the screen frame is poor, and the screen body moves not in translation, but in torsion, which will lead to material deviation. Replace the grid frame with strong rigidity, and fix it firmly. For the vibrating dewatering screen with wide screen surface, a pressing frame clamp is also required in the middle, so that the vibration of the grid frame and the vibrating dewatering screen host is at the same frequency, and similar problems can be solved without generating self vibration.
3. Uneven feeding. In the process of screening materials with linear vibrating screen, materials shall be fed evenly as far as possible. Avoid discharging in one direction.
4. Change of installation foundation plane and spring support position. Check whether the spring support has changed, and pay attention to the maintenance of the spring.
5. Whether the position of the vibration exciter and both sides of the swing eccentric block are balanced.
6. Uneven feeding at the production site. It is necessary to add a distributor to provide uniform feeding. During the use of the vibrating dewatering screen, ensure that the feeding is uniform, so as to effectively avoid unnecessary failures in the production and use of the mud dewatering screen.






